Jump to: navigation, search

Reader troubleshooting

This page contains changes which are not marked for translation.

My reader is not detected

Possible causes:

Polyx NF+ network issues
The Polyx NF+ requires a DHCP server in your network to obtain an ip address. Use a network scanning tool (e.g. Netscan to check if your Polyx has a network connection. (The MAC address of a Polyx NF+ will start with 001ED1______). You can check if the webinterface of the Polyx is running by opening the ip address in a web browser.

Reader not correctly wired
Check if the reader is wired correctly. An often made mistake is the bundling of the orange with the orange-white and the green with green-white. The correct bundling is orange with green and orange-white with green-white.


Sirius F30

Sirius F30 Connector layout.png
Sirius F30 RJ45 T568B color RJ45 T568B pin
7 VCC (+) Blue.png Blue 4
6 GND (-) Brown.png Brown 8
5
4
3
2 White orange.png
White green.png
White/Orange and
White/Green
1
3
1 Orange.png
Green.png
Orange and
Green
2
6